Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
Yakima's BedRock is a set of 4 holders that give your pickup dual-level storage: up above on the Yakima crossbars that fit into the holders, and on the pickup bed below. These no-tools, no-drill holders accept multiple crossbar widths and then you can install all of Yakima's accessories to build your ultimate pickup rack (crossbars and accessories sold separately).
Got a minute? That's about the time it takes to install Yakima's BeddyJo in your truck. This innovative pickup-bed rack uses WonderWedges for quick, sturdy installation without drilling. With soft foam pads protecting your truck bed, you can carry two bikes securely on this corrosion-resistant, heavy-duty steel rack. One size fits compact to full-size beds, and BeddyJo works with or without bed liners.
Yakima's BikerBar is a complete tool-free bike carrying system for your pickup truck. It installs and removes easily with the included Yakima BedRock quick releases and comes with a round bar and two locking Boa bike mounts. Available in two sizes, it fits most common mid- and full-size trucks.
When you've got a tough racking dilemma, what you really need is Yakima's BlockHead. This handy device securely holds your bike by the fork with a rugged, 9mm-diameter skewer. The BlockHead is made of anodized aluminum and bolts to your pickup, RV or practically anywhere (use your imagination for hundreds of other bike-storage possibilities).
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Yakima's Control Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory track systems). The Control Towers attach to your factory track system with Yakima's vehicle-specific landing pads and they have die-cast components for a sturdy hold.
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Besides improving your vehicle's looks, the Yakima Fairing reduces wind noise and the amount of debris that strikes your bikes. Its sleek design fits most windshield angles and curvatures and is compatible with every Yakima tower. Plus, it's easy to install and a great place for your favorite bike stickers!
Body for HitchLock. Requires SKS lock core. (Sold Seperately)
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Expand your Yakima HoldUp hitch rack (sold separately) to carry 4 bikes by adding their HoldUp Plus 2 Add-On Kit. With it, you can haul 4 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters. Side-to-side adjustability ensures a perfect fit and minimizes bike-to-bike interference. This sturdy rack sports heavy cast wheel trays and Yakima's adjustable StrongArm retainers that hold the bikes by the wheels for superior stability and super-quick loading.
Roll out on your next boat trip with these easy loading hull rollers. The Dynaflex" padded rollers protect and grip your hull, then lock into place once loaded. Fits many hull shapes with pivoting bases. - Includes 2 saddles per package; add another set of Yakima saddles or rollers to complete your custom loading system - Easy loading and unloading with U-shaped rollers - Features rollers mounted on pivoting bases that fit many kayak and canoe hull shapes - Dynaflex padded rollers protect and grip your hull, then lock into place once loaded - Fits Yakima round or square crossbars - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - Minimum crossbar spreads of 24 inches\u001D or more
There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.
Yakima's Locking BedHead keeps your bike locked and secure in your truck bed. This durable and corrosion-resistant mount quickly clamps (no drilling required) onto the interior lip of your truck bed's rail. The included SKS (Same Key System) cores and keys lock the bike and mount to the truck. A beefy, long-throw (so you don't need to unscrew it to clear fork safety tabs) 9-mm-diameter skewer holds your steed securely. And, padding protects your truck’s finish, too.
$35.00 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima's Q Stretch Kit enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It works with Q Towers.
Toting a tandem can be tough. Not any more. Yakima's Sidewinder makes it easier than ever to transport your twofer. The clever swingarm fork mount makes loading a one-person task and the padded boom cradle won't harm bottom-routed cables. Universal snap-around mounts allow the Sidewinder to attach equally well to round (Yakima) and square crossbars. It's designed to clear hatches and flip-up rear doors on most vehicles, too.
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
$59.95 - $74.95
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Ideal for vehicles without integrated rails, Thule's Top Tracks rail system mounts permanently to fiberglass camper shells or roofs. This creates a convenient, stable platform for your rack accessories of choice (sold separately). It comes with all the necessary hardware, and even includes the appropriate drill bit.
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
RockyMounts' Clutch SD is a tough fork-mount bolt-on bike rack. It interfaces perfectly with bed channels in trucks from Toyota, Nissan, Chevy, and GMC and couldn't be any more simple to use. The Clutch SD fits a 9mm fork axle, and the cast aluminum body has a center opening that easily accommodates a cable lock (sold separately).
RockyMounts' TieRod is a fantastically simple and elegant option for attaching a fork mount roof rack to your vehicle's factory crossbars. Not only will you be impressed with its easy, secure operation, you'll be thrilled with how well the rubber coated stainless steel straps perfectly hug the roof racks on your car. Plus, with RockyMounts locks (sold separately) you can lock the rack to your vehicle and your bike to the rack.
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.
$24.99 - $25.00
The lock comes with a burlap bag, dust cap, two keys, and a Kuat keychain bottle opener. 3/8" pin is for our 1.25" racks and the 1/2" pin is for our 2" racks.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
Page 1 of 2 Next page